AIS Router AI2524 Manual de usuario descargar pdf (Pagina 392)

100

101

AI2524 Router Card User’s Manual

Page 16-16 August 1997

2524UM

Configuring DDS

The 4-wire 56/64-kbps DSU/CSU WAN module is configured for

DDS (which are leased or dedicated lines) as the factory default, but it

can be configured for either switched 56/64-kbps service or DDS. Th

DDS configuration is described in this section. To configure the 4-wire

56/64-kbps DSU/CSU WAN module for circuit-switched service,

follow the instructions in the previous section Configuring Switched

56.

Take these steps to configure the 4-wire 56/64-kbps DSU/CSU mod-

ule for DDS, substituting the correct addresses and host names as ap-

propriate for your network

1. Enter enable mode:

Router> enable

password: enablepassword

2. Enter configuration mode:

Router# config term

Router(config)#

3. Assign an IP address to the serial port on the module:

Router(config)# interface serial port _number

Router(config-if)# ip address ipaddress subnet mask

Router(config-if)#

no keepalive

4. Set the network type to DDS:

Router(config-if)# service-module

56k network-type ads

5. Return to user EXEC mode:

Router(config-if)# exit

Router(config)# exit

Router# exit

Router>

1 2 ... 387 388 389 390 391 392 393 394 395 396 397 ... 417 418

Comentarios a estos manuales

Sin comentarios

AIS Router AI2524 Manual de usuario Pagina 392

Comentarios a estos manuales